Gigabyte GA-A75M-DS2 - Advanced Memory Settings; Extreme Memory Profile (X.M.P.); System Memory Multiplier and Timing

- 28 -
& ExtremeMemoryProle(X.M.P.)
(Note)
 AllowstheBIOStoreadtheSPDdataonXMPmemorymodule(s)toenhancememoryperformancewhen
enabled.
Disabled  Disablesthisfunction.(Default)
Prole1  UsesProle1settings.
Prole2
(Note)
 UsesProle2settings.
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data.(Default:Auto)
& MemoryFrequency(MHz)
 ThisvalueisautomaticallyadjustedaccordingtotheBCLK/PCIe Clock Control and System Memory
Multiplier settings.
This item is present only when you install a memory module that supports this feature.
` AdvancedMemorySettings
& ExtremeMemoryProle(X.M.P.)
(Note)
, System Memory Multiplier, Memory
Frequency(Mhz)
The settings above are synchronous to those under the same items on the AdvancedFrequencySettings
menu.
& DRAM Timing Selectable
Quick and Expertallowsthememorytimingsettingsbelowtobecongurable.Optionsare:Auto(default),
Quick, Expert.
& ProleDDRVoltage
When using a non-AMP memory module or Extreme Memory Prole (X.M.P.) is set to Disabled, this item
will display as 1.50V. When ExtremeMemoryProle(X.M.P.) is set to Prole1 or Prole2, this item will
display the value based on the SPD data on the AMP memory.
& ProleVTTVoltage
The value displayed here is dependent on the CPU being used.