Gigabyte GA-A75M-DS2 - Integrated Graphics

- 37 -
& Integrated Graphics
Enables or disables the onboard graphics function.
Auto The BIOS will automatically enable or disable the onboard graphics depending on
thegraphicscardbeinginstalled.(Default)
Disabled Disables the onboard graphics.
Force Always activates the onboard graphics, whether or not a PCI Express card is
installed.
& UMA Frame buffer Size
 ThisitemiscongurableonlywhenIntegrated Graphics is set to Force.Framebuffersizeisthetotal
amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will
useonlythismemoryfordisplay.Optionsare:Auto(default),256M,512M,1G,2G.
& PrimaryVideoDevice
 SpeciestherstinitiationofthemonitordisplayfromtheinstalledPCIExpressgraphicscardortheonboard
graphics.
IGDVideo   Setstheonboardgraphicsastherstdisplay.
NB PCIe Slot Video Sets the PCI Express graphics card on the PCI Express slot controlled by the
NorthBridgeastherstdisplay.(Default)
` SATAConguration
& PORT0HotPlug~PORT3HotPlug
Enables or disable the hot plug capability for each SATA port. (Default:Disabled)
& SATAPoweronPORT0~SATAPoweronPORT3
Enables or disables each SATA port. (Default:Enabled)