Gigabyte GA-B250M-Gaming 3 - Chapter 3 Appendix; Enabling Intel Optane Technology

- 36 -
Chapter 3 Appendix
3-1 Enabling Intel
®
Optane
™
Technology
System Requirements
1. Intel
®
Optane
™
SSD
2. The Optane
™
SSD must have at least 16 GB capacity, and it must have equal or smaller capacity than the
hard drive/SSD to be accelerated.)
Step 1:
In BIOS Setup, go to BIOS and set CSM Support to Enabled and Storage Boot Option Control to UEFI. Then
go to Peripherals\SATAAndRSTConguration, set SATA Mode Selection to Intel RST With Intel Optane
System Acceleration. Save the changes and exit BIOS Setup.
Step 2:
Enter the operating system, launch the Intel
®
Rapid Storage Technology utility from the Start menu, and then
enable Intel
®
Optane
™
Technology.