Hardware Installation - 10 -
1-2 Product Specications
CPU
Built in with an Intel
®
Dual-core Atom
™
D510 processor (1.66 GHz)
(Note 1)
1M L2 cache
Chipset
Intel
®
NM10
Memory
2 x 1.8V DDR2 DIMM sockets supporting up to 4 GB of system memory
(Note 2)
Support for DDR2 800/667 MHz memory modules
(Go to GIGABYTE's website for the latest memory support list.)
Audio
Realtek ALC888B codec
HighDenitionAudio
2/4/5.1/7.1-channel
(Note 3)
LAN
1 x RTL8111D chip (10/100/1000 Mbit)
Expansion Slot
1 x PCI slot
Storage Interface
Chipset:
- 2 x SATA 3Gb/s connectors (SATA2_0, SATA2_1) supporting up to 2 SATA
3Gb/s devices
GIGABYTE SATA2 chip:
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
- 2 x SATA 3Gb/s connectors (GSATA2_0, GSATA2_1) supporting up to 2
SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, and JBOD
USB
Chipset
- Up to 8 USB 2.0/1.1 ports
(4 on the back panel, 4 via the USB brackets
connected to the internal USB headers)
Internal
1 x 20-pin ATX main power connector
Connectors
1 x 4-pin ATX 12V power connector
1 x IDE connector
4 x SATA 3Gb/s connectors
1 x CPU fan header
1 x system fan header
1 x front panel header
1 x front panel audio header
2 x USB 2.0/1.1 headers
1 x chassis intrusion header
1 x power LED header