Do you have a question about the Gigabyte GA-Z87P-D3 and is the answer not in the manual?
ECC | No |
---|---|
Non-ECC | Yes |
Memory voltage | 1.5 V |
Memory channels | Dual-channel |
Memory slots type | DIMM |
Number of memory slots | 4 |
Supported memory types | DDR3-SDRAM |
Maximum internal memory | 32 GB |
Supported memory clock speeds | 1333, 1600 MHz |
Processor manufacturer | Intel |
Compatible processor series | Intel Celeron, Intel Pentium |
Supported processor sockets | LGA 1150 (Socket H3) |
Maximum number of SMP processors | 1 |
USB 2.0 connectors | 3 |
Number of SATA III connectors | 6 |
Number of Parallel ATA connectors | 0 |
HDMI version | 1.4a |
USB 2.0 ports quantity | 2 |
Audio chip | Realtek ALC887 |
Cooling type | Passive |
Component for | PC |
Motherboard chipset | IntelĀ® Z87 |
PC health monitoring | CPU, FAN, Temperature |
Audio output channels | 7.1 channels |
Motherboard form factor | ATX |
RAID levels | 0, 1, 5, 10 |
Supported storage drive interfaces | SATA, SATA II, SATA III |
Graphics card | HD Graphics |
Maximum resolution | 4096 x 2160 pixels |
Parallel processing technology support | Not supported |
PCI Express slots version | 2.0, 3.0 |
PCI Express configurations | 1x4, 1x16 |
Cables included | SATA |
Ethernet interface type | Gigabit Ethernet |
BIOS type | EFI AMI |
ACPI version | 2.0a |
BIOS memory size | 64 Mbit |
Depth | 225 mm |
---|---|
Width | 305 mm |
Essential safety guidelines and procedures to follow before installing hardware components to prevent damage.
Step-by-step instructions for safely installing the CPU and its cooling solution onto the motherboard.
Guide to installing memory modules, including dual-channel configuration and best practices.
Menu for monitoring and adjusting CPU, memory, and voltage settings for performance tuning.
Steps to install SATA drives and configure SATA controller modes (IDE, AHCI, RAID) in BIOS.
Guide to installing Windows 8/7, including loading the necessary SATA RAID/AHCI drivers.
Details on updating the BIOS using Q-Flash and @BIOS utilities for system stability and features.
FAQs and troubleshooting procedures to resolve common system startup and hardware issues.