Do you have a question about the Gigabyte GA-Z87X-UD3H and is the answer not in the manual?
ECC | No |
---|---|
Non-ECC | Yes |
Memory voltage | 1.5 V |
Memory channels | Dual-channel |
Memory slots type | DIMM |
Number of memory slots | 4 |
Supported memory types | DDR3-SDRAM |
Maximum internal memory | 32 GB |
Supported memory clock speeds | 1333, 1600, 3000 MHz |
Processor manufacturer | Intel |
Compatible processor series | Intel Celeron, Intel Pentium |
Supported processor sockets | LGA 1150 (Socket H3) |
Maximum number of SMP processors | 1 |
USB 2.0 connectors | 3 |
Number of SATA III connectors | 8 |
Number of Parallel ATA connectors | 0 |
USB 3.2 Gen 1 (3.1 Gen 1) connectors | 2 |
HDMI version | 1.4a |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 6 |
Audio chip | Realtek ALC898 |
Cooling type | Passive |
Component for | PC |
Motherboard chipset | Intel® Z87 |
PC health monitoring | CPU, FAN, Temperature |
Audio output channels | 7.1 channels |
Motherboard form factor | ATX |
RAID levels | 0, 1, 5, 10 |
Supported storage drive interfaces | SATA, SATA II, SATA III |
Graphics card | HD Graphics |
Maximum resolution | 4096 x 2160 pixels |
Parallel processing technology support | 2-Way CrossFireX, 2-Way SLI |
PCI Express slots version | 2.0, 3.0 |
PCI Express configurations | 1x4, 1x8, 1x16 |
Cables included | SATA |
Ethernet interface type | Gigabit Ethernet |
BIOS type | EFI AMI |
ACPI version | 2.0a |
BIOS memory size | 16 Mbit |
Depth | 244 mm |
---|---|
Width | 305 mm |
Essential safety and handling guidelines for installing motherboard components.
Detailed technical specifications of the GA-Z87X-UD3H motherboard.
Step-by-step guide for installing the CPU and CPU cooler.
Instructions for installing RAM modules.
Configuration for CPU, memory frequencies, voltages, and system monitoring.
Setup for Intel Z87 SATA controllers, RAID modes, and UEFI/Legacy RAID.
Setup for Marvell SATA controller, RAID modes, and array creation.
Procedures for installing SATA RAID/AHCI drivers and the operating system.
Guide to installing essential chipset drivers using Xpress Install.
Step-by-step guide for updating BIOS using the Q-Flash utility.