Do you have a question about the Gigabyte GA-Z87-HD3 and is the answer not in the manual?
ECC | No |
---|---|
Non-ECC | Yes |
Memory voltage | 1.5 V |
Memory channels | Dual-channel |
Memory slots type | DIMM |
Number of memory slots | 4 |
Supported memory types | DDR3-SDRAM |
Maximum internal memory | 32 GB |
Supported memory clock speeds | 1333, 1600 MHz |
Processor manufacturer | Intel |
Compatible processor series | Intel Celeron, Intel Pentium |
Supported processor sockets | LGA 1150 (Socket H3) |
Maximum number of SMP processors | 1 |
USB 2.0 connectors | 3 |
Number of SATA III connectors | 6 |
Number of Parallel ATA connectors | 0 |
HDMI version | 1.4a |
USB 2.0 ports quantity | 2 |
Audio chip | Realtek ALC892 |
Cooling type | Passive |
Component for | PC |
Motherboard chipset | IntelĀ® Z87 |
PC health monitoring | CPU, FAN, Temperature |
Audio output channels | 7.1 channels |
Motherboard form factor | ATX |
RAID levels | 0, 1, 5, 10 |
Supported storage drive interfaces | SATA, SATA II, SATA III |
Graphics card | HD Graphics |
Maximum resolution | 4096 x 2160 pixels |
Parallel processing technology support | 2-Way CrossFireX |
PCI Express slots version | 2.0, 3.0 |
PCI Express configurations | 1x4, 1x16 |
Cables included | SATA |
Ethernet interface type | Gigabit Ethernet |
BIOS type | EFI AMI |
ACPI version | 2.0a |
BIOS memory size | 64 Mbit |
Depth | 225 mm |
---|---|
Width | 305 mm |
Essential safety and handling guidelines before installing hardware components.
Detailed technical specifications of the motherboard and its components.
Step-by-step instructions for installing the central processing unit and its cooler.
Guide on how to properly install RAM modules into the motherboard slots.
Description and function of external ports and connectors on the motherboard's rear panel.
Identification and purpose of internal headers and connectors on the motherboard.
Overview of the BIOS startup screen and keyboard shortcuts for navigation.
Explanation of the main BIOS interface and key functions for setup.
Advanced settings for CPU, memory frequency, voltage, and system monitoring.
Settings for onboard devices like SATA, USB, LAN, and audio.
Options to configure system power saving features and wake-up events.
Procedures for saving configuration changes, loading defaults, and exiting BIOS.
Steps to set SATA controller mode (IDE, AHCI, RAID) in BIOS.
Guide for setting up RAID arrays using the UEFI interface.
Steps to install necessary drivers and the operating system for RAID/AHCI.
Guide to installing essential chipset drivers using the Xpress Install utility.
Instructions for updating the system BIOS using GIGABYTE's tools.
Overview of the APP Center and its utilities for system tuning.
Guide to setting up audio jacks for different channel configurations and microphone input.
Step-by-step guide to diagnose and solve common system startup problems.
Contact information for GIGABYTE support worldwide.