Gigabyte GA-Z87-HD3 - Hot Plug; Parallel Port

BIOS Setup
- 52 -
` SATAConguration
& SATA Controller(s) (Intel
®
Z87/H87 Chipset)
 EnablesordisablestheintegratedSATAcontrollers.(Default:Enabled)
& SATA Mode Selection (Intel
®
Z87/H87 Chipset)
 EnablesordisablesRAIDfortheSATAcontrollersorcongurestheSATAcontrollerstoAHCImode.
IDE   CongurestheSATAcontrollertoIDEmode.
RAID Enables RAID for the SATA controller.
AHCI   CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface
(AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced
SerialATAfeaturessuchasNativeCommandQueuingandhotplug.(Default)
` Serial ATA Port 0/1/2/3/4/5
& Port 0/1/2/3/4/5
 EnablesordisableseachSATAport.(Default:Enabled)
& Hot plug
 EnablesordisablethehotplugcapabilityforeachSATAport.(Default:Disabled)
` SuperIOConguration
 ThissectionprovidesinformationonthesuperI/Ochipandallowsyoutoconguretheserialportand
parallel port.
& Serial Port A
 Enablesordisablestheonboardserialport.(Default:Enabled)
& Parallel Port
 Enablesordisablestheonboardparallelport.(Default:Enabled)