Gigabyte GA-Z87P-D3 - Channel Interleaving; Rank Interleaving

BIOS Setup - 40 -
This sub-menu provides memory timing settings for each channel of memory. This sub-menu provides memory
timingsettingsforeachchannelofmemory.Therespectivetimingsettingscreensarecongurableonlywhen
Memory Timing Mode is set to Manual or Advanced Manual.Note:Yoursystemmaybecomeunstableorfail
to boot after you make changes on the memory timings. If this occurs, please reset the board to default values
byloadingoptimizeddefaultsorclearingtheCMOSvalues.
` Channel A/B Memory Sub Timings
& Memory Initialization Mode
 Allowsyoutocongurememorytimingprolefordifferentfrequencymemory.Optionsare:Auto(default),
NormalSpeed,HighSpeed,ExtremeSpeed.
& Memory Enhancement Settings
 Providesthreedifferentmemoryperformanceenhancementsettings:Normal(basicperformance),Enhanced
Stability,andEnhancedPerformance.(Default:Normal)
& Memory Timing Mode
Manual and Advanced Manual allows the Channel Interleaving, Rank Interleaving, and memory timing
settingsbelowtobecongurable.Optionsare:Auto(default),Manual,AdvancedManual.
& ProleDDRVoltage
 Whenusinganon-XMPmemorymoduleorExtremeMemoryProle(X.M.P.) is set to Disabled, this item
will display as 1.50V.WhenExtremeMemoryProle(X.M.P.) is set to Prole1 or Prole2, this item will
displaythevaluebasedontheSPDdataontheXMPmemory.
& Channel Interleaving
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. Auto lets the BIOS
automaticallycongurethissetting.(Default:Auto)
& Rank Interleaving
Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different
ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically
congurethissetting.(Default:Auto)