Gigabyte GA-E6010N - Product Specifications

- 6 -
1-2 ProductSpecications
APU  Built in an AMD
®
E1-6010 (1.35 GHz) APU with Radeon
™
R2 graphics SoC
* Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage
to these components.
 2MB L2 Cache
Memory  2 x DDR3 DIMM sockets supporting up to 32 GB of system memory
* The maximum 32 GB of system memory can be supported using 16 GB (or above)
memory modules. GIGABYTE will update the memory support list on the ofcial
website when the memory modules are available on the market.
 Support for DDR3 1333/1066 MHz memory modules
(Go to GIGABYTE's website for the latest supported memory speeds and memory
modules.)
Onboard
Graphics
 Integrated in the SoC:
- 1 x D-Sub port, supporting a maximum resolution of 1920x1200
- 1 x HDMI port, supporting a maximum resolution of 4096x2160
* Support for HDMI 1.4a version.
- Maximum shared memory of 2 GB
Audio  Realtek
®
ALC887 codec
 High Denition Audio
 2/4/5.1/7.1-channel
* To congure 7.1-channel audio, you need to open the audio software and select
Device advanced settings > Playback Device to change the default setting rst.
Please visit GIGABYTE's website for details on conguring the audio software.
 Support for S/PDIF Out
LAN
 Realtek
®
GbE LAN chip (1000 Mbit/100 Mbit)
Expansion Slots  1 x PCI slot
Storage Interface  Integrated in the SoC:
- 2 x SATA 6Gb/s connectors
USB  Integrated in the SoC:
- 2 x USB 3.1 Gen 1 ports on the back panel
- 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through
the internal USB headers)
Internal
Connectors
 1 x 24-pin ATX main power connector
 1 x 4-pin ATX 12V power connector
 2 x SATA 6Gb/s connectors
 1 x APU fan header
 1 x system fan header
 1 x front panel header
 1 x front panel audio header
 1 x S/PDIF Out header
 2 x USB 2.0/1.1 headers
 1 x serial port header
 1 x chassis intrusion header
 1 x Clear CMOS jumper