EasyManua.ls Logo

Gigabyte GA-F2A68HM-S1 - Page 25

Gigabyte GA-F2A68HM-S1
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 25 -
& 
Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller.
Disabled Disables option ROM.
 
UEFI Only Enables UEFI option ROM only.
 
 
CSM Support is set to Always.
& 
Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other
than the LAN, storage device, and graphics controllers.
Legacy OpROM Enables legacy option ROM only.
 
CSM Support is set to Always.
& 
Disables or enables booting from the network to install a GPT format OS, such as installing the OS from

& Ipv4 PXE Support
 is enabled.
& Ipv6 PXE Support
 is enabled.
& PXE boot wait time

 is enabled.
& Administrator Password



BIOS Setup. Differing from the user password, the administrator password allows you to make changes to
all BIOS settings.
& User Password



Setup. However, the user password only allows you to make changes to certain BIOS settings but not all.
To cancel the password, press <Enter> on the password item and when requested for the password, enter




Related product manuals