Gigabyte GA-G41MT-S2 - Page 25

- 25 -

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
x Driving Strength Prole Auto
x Data Driving Pull-Up Level Auto
x Cmd Driving Pull-Up Level Auto
x Ctrl Driving Pull-Up Level Auto
x Clk Driving Pull-Up Level Auto
x Data Driving Pull-Down Lev Auto
x Cmd Driving Pull-Down Lev Auto
x Ctrl Driving Pull-Down Lev Auto
x Clk Driving Pull-Down Lev Auto
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Channel A/B Driving Settings
Item Help
Menu Level
```
tRD Phase0 Adjustment &
Options are: Auto (default), 0-Normal, 1-Advanced.
tRD Phase1 Adjustment &
Options are: Auto (default), 0-Normal, 1-Advanced.
tRD Phase2 Adjustment &
Options are: Auto (default), 0-Normal, 1-Advanced.
tRD Phase3 Adjustment &
Options are: Auto (default), 0-Normal, 1-Advanced.
Trd2rd(Different Rank) &
Options are: Auto (default), 1~15.
Twr2wr(Different Rank) &
Options are: Auto (default), 1~15.
Twr2rd(Different Rank) &
Options are: Auto (default), 1~15.
Trd2wr(Same/Diff Rank) &
Options are: Auto (default), 1~15.
DIMM1 Clock Skew Control &
Options are: Auto (default), +800ps~-700ps.
DIMM2 Clock Skew Control &
Options are: Auto (default), +800ps~-700ps.
DDR Write Leveling &
Allows you to determine whether to ne-tune memory parameters to enhance memory compatibility.
Auto Lets the BIOS decide whether to enable this function. (Default) 
Enabled Enables this function to enhance memory compatibility. 
Disabled Disables this function. 
DDR Write Training &
Allows you to determine whether to ne-tune memory parameters to enhance memory compatibility.
Auto Lets the BIOS decide whether to enable this function. (Default) 
Enabled Enables this function to enhance memory compatibility. 
Disabled Disables this function. 
Channel A/B Driving Settings &