
Do you have a question about the Gigabyte GA-H110M-S2H and is the answer not in the manual?
| Non-ECC | Yes |
|---|---|
| Memory channels | Dual-channel |
| Memory slots type | DIMM |
| Number of memory slots | 2 |
| Supported memory types | DDR4-SDRAM |
| Maximum internal memory | 32 GB |
| Supported memory clock speeds | 2133 MHz |
| Processor socket | LGA 1151 (Socket H4) |
| Processor manufacturer | Intel |
| Compatible processor series | Intel Celeron, Intel Pentium |
| Maximum number of SMP processors | 1 |
| Number of SATA III connectors | 4 |
| USB 3.2 Gen 2 (3.1 Gen 2) connectors | 0 |
| Supported storage drive interfaces | SATA III |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet interface type | Gigabit Ethernet |
| Component for | PC |
| Power source type | ATX |
| Motherboard chipset | IntelĀ® H110 |
| Audio output channels | 7.1 channels |
| Motherboard form factor | micro ATX |
| Windows operating systems supported | Windows 10 Education x64, Windows 10 Enterprise x64, Windows 10 Home x64, Windows 10 Pro x64, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8.1 Enterprise x64, Windows 8.1 Pro x64, Windows 8.1 x64 |
| Graphics card | HD Graphics |
| Maximum resolution | 1920 x 1200 pixels |
| Maximum graphics card memory | 512 MB |
| Parallel processing technology support | - |
| BIOS type | UEFI AMI |
| ACPI version | 5.0 |
| Depth | 170 mm |
|---|---|
| Width | 226 mm |
Visual guide to motherboard components and connectors.
Guidelines to prevent damage during installation.
Details on CPU, Chipset, Memory, Graphics, Audio, LAN, and Expansion Slots.
Steps and precautions for CPU installation.
Guidelines for memory installation and Dual Channel configuration.
Precautions for installing expansion cards.
Identification and description of back panel connectors.
Identification and description of internal connectors on the motherboard.
Description of the initial GIGABYTE logo screen during boot.
Information on BIOS version, CPU, memory, and voltage settings.
Details on motherboard model, BIOS version, date, and system time.
Configuration options for boot order, security, and fast boot settings.
Configuration for onboard devices like PTT, LAN, Audio, USB, and SATA.
Settings related to Intel virtualization, onboard graphics, and audio controller.
Settings for system power states, wake-up events, and energy saving.
Options for saving BIOS changes, loading defaults, and exiting setup.
Instructions for installing motherboard drivers using Xpress Install.
Information on copyright, environmental compliance, and safety notices.












Loading...