B. Updating the BIOS
In the main menu of Q-Flash, use the keyboard or mouse to select an item to execute. When updating the
Step 1:
Update BIOS From Drive.
Step 2:
the message "Are you sure to update BIOS?" appears, select Yes to begin the BIOS update. The monitor will
display the update process.
Step 3:
When the update process is complete, select Reboot to reboot the system.
2. Select Flash Disk.
• The Save BIOS to Drive
•
•
an independent SATA controller, use the <End> key during the POST to access Q-Flash.
• Do not turn off or restart the system when the system is reading/updating the BIOS.
•
Q-Flash Utility v1.02
Model Name : Z77-D3H
BIOS Version : F3c
BIOS Date : 01/31/2012
Flash Type/Size : MXIC 25L6465E/6406E 8MB
Update BIOS From Drive
Save BIOS to Drive
Return to BIOS setup
Select Device
Flash Disk
Q-Flash
BIOS update is completed.
Power off
Reboot
To Next Page
Loading...
