Gigabyte GA-H77TN - Page 36

- 36 -
 
&
SATA Mode Selection
j

SATA controllers to AHCI mode.

  

RAID Enables RAID for the SATA controller.

  

features such as Native Command Queuing and hot plug. (Default)
&
SATA Mode Selection
kl


  

  

features such as Native Command Queuing and hot plug. (Default)
&
Serial ATA Port 0/Serial ATA Port 1/Serial ATA Port 2/Serial ATA Port 3
jk
/mSATA
(Note)

System will automatically detect HDD type.
      
properly if you enter improper information for this category.
Hard drive information should be labeled on the outside device casing. Enter the appropriate option
based on this information.
j
Only for GA-H77TN.
k
Only for GA-B75TN.
l
Only for GA-H61TN.