- 44 -
2-4 Boot Menu
The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error
&
Bootup NumLock State
Allows you to select power-on state for NumLock function.
Options available: On/Off. Default setting is On.
&
Fast Boot
If enabled, the system will speed the boot up time.
Options available: Enabled/Disabled. Default setting is Disabled.
&
Boot Option #1/2/3
&
Hard Drive/CD/DVD ROM Drive/Floppy Drive/Network Device BBS Priorities
and devices that support Boot from LAN function, etc. Press <Enter> on this item to enter the submenu
that presents the devices of the same type that are connected. This item is present only if at least one
device for this type is installed.
To Next Page
Loading...
