Gigabyte GA-K8NF-9-TA - Onboard LAN Boot ROM and SATA RAID; IDE RAID and Serial ATA Port Configuration

BIOS Setup- 35 -
On-Chip MAC Lan (controlled by Marvell 8053 chip)
Auto Auto-detect onboard LAN chip function. (Default value)
Disabled Disable onboard LAN chip function.
On-Chip LAN BOOT ROM
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled Enable this function.
Disabled Disable this function. (Default value)
IDE Primary Master RAID
Enabled Enable 1st master channel IDE RAID function.
Disabled Disable this function. (Default value)
IDE Primary Slave RAID
Enabled Enable 1st slave channel IDE RAID function.
Disabled Disable this function. (Default value)
IDE Secndry Master RAID
Enabled Enable 2nd master channel IDE RAID function.
Disabled Disable this function. (Default value)
IDE Secndry Slave RAID
Enabled Enable 2nd slave channel IDE RAID function.
Disabled Disable this function. (Default value)
Serial-ATA 1
Enabled Enable Serial ATA 1 supported. (Default value)
Disabled Disable Serial ATA 1 supported.
SATA 1 Primary RAID
Enabled Enable 1st SATA primary RAID function.
Disabled Disable this function. (Default value)
SATA 1 Secondary RAID
Enabled Enable 1st SATA secondary RAID function.
Disabled Disable this function. (Default value)
Serial-ATA 2
Enabled Enable Serial ATA 2 supported. (Default value)
Disabled Disable Serial ATA 2 supported.
SATA 2 Primary RAID
Enabled Enable 2nd SATA primary RAID function.
Disabled Disable this function. (Default value)
SATA 2 Secondary RAID
Enabled Enable 2nd SATA secondary RAID function.
Disabled Disable this function. (Default value)
IDE Prefetch Mode
Enabled Enable IDE Prefetch mode. (Default value)
Disabled Disable IDE Prefetch mode.