Gigabyte GA-K8NF-9-TA - MB Intelligent Tweaker (M.I.T.) Configuration; CPU Frequency and Spread Spectrum Settings; PCI Express Clock and CPU Ratio; Graphics Booster and Voltage Control

GA-K8NF-9-TA Motherboard - 42 -
2-7 MB Intelligent Tweaker(M.I.T.)
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
MB Intelligent Tweaker(M.I.T.)
CPU Frequency 200.0
CPU Spread Spectrum [Center Spread]
PCIE Clock 100Mhz
K8 CPU Clock Ratio [Default]
Robust Graphics Booster [Auto]
CPU Voltage Control Normal
Normal CPU Vcore 1.500V
Core Power voltage control Normal
HT-Link voltage control Normal
DDR voltage control Normal
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F7: Setup Defaults
Item Help
Menu Level`
CPU Frequency
200.0 Auto detect CPU frequency. (Default value: 200)
CPU Spread Spectrum
Disabled Disable CPU Spread Spectrum.
Center Spread Set CPU Spread Spectrum to Center Spread. (Default value)
PCIE Clock
100Mhz Auto detect PCI-E clock. (Default value: 100Mhz)
K8 CPU Clock Ratio
Default Set K8 CPU Clock Ratio to CPU factory default. (Default value)
x4 800Mhz ~ x20 4000Mhz. Set K8 CPU Clock Ratio from x4 800Mhz to x20 4000Mhz.
Robust Graphics Booster
Select the options can enhance the VGA graphics card bandwidth to get higher performance.
Auto Set Robust Graphics Booster to Auto. (Default value)
Fast Set Robust Graphics Booster to Fast.
Turbo Set Robust Graphics Booster to Turbo.
CPU Voltage Control
Auto detect CPU voltage. (Default value: Normal)
Normal CPU Vcore
Display your CPU Vcore voltage.
Incorrect using these features may cause your system broken.