Gigabyte GA-K8NF-9-TA - PC Health Status Monitoring; Voltage and Temperature Monitoring; Fan Speed Monitoring and Warnings; CPU Smart Fan Control Function

BIOS Setup- 41 -
2-6 PC Health Status
Current Voltage(V) Vcore / DDR25V / +3.3V / +12V
Detect system's voltage status automatically.
Current CPU Temperature
Detect CPU temperature automatically.
Current CPU/SYSTEM FAN Speed (RPM)
Detect CPU/SYSTEM fan speed status automatically.
CPU Warning Temperature
60
o
C / 140
o
F Monitor CPU temperature at 60
o
C / 140
o
F.
70
o
C / 158
o
F Monitor CPU temperature at 70
o
C / 158
o
F.
80
o
C / 176
o
F Monitor CPU temperature at 80
o
C / 176
o
F. (Default value)
90
o
C / 194
o
F Monitor CPU temperature at 90
o
C / 194
o
F.
Disabled Disable this function.
CPU FAN Fail Warning
Disabled Disable CPU fan fail warning function.
Enabled Enable CPU fan fail warning function. (Default value)
CPU Smart FAN Control
Disabled Disable this function.
Enabled Enable CPU Smart Fan control function. (Default value)
a. When the CPU temperature is higher than 60 degrees Celsius, CPU fan
will run at full speed.
b. The speed of CPU fan will increase linearly depend on the temperature if
the temperature is more than 50 degree and less than 59 degree.
c. When the CPU temperature is lower than 50 degrees Celsius, CPU fan will
run at the lowest speed.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
PC Health Status
Vcore OK
DDR25V OK
+3.3V OK
+12V OK
Current CPU Temperature 44
o
C
Current CPU FAN Speed 3183 RPM
Current SYSTEM FAN Speed 0 RPM
CPU Warning Temperature [80
o
C/176
o
F]
CPU FAN Fail Warning [Enabled]
CPU Smart FAN Control [Enabled]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F7: Setup Defaults
Item Help
Menu Level`
[Disabled]
Don't monitor
current temperature
[60
o
C-90
o
C]
Alarm when current
temperature over than
the selected
temperature