BIOS Setup- 43 -
English
On-Chip MAC Lan
Auto Enable the LAN controller built-in core chipset. (Default value)
Disabled Disable the LAN controller built-in core chipset.
On-Chip LAN BOOT ROM
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled Enable this function. (Default value)
Disabled Disable this function.
NV SATA RAID function
Enabled Allows users to configure individual SATA channels as RAID or ATA mode.
Disabled Disable the RAID function for all of the onboard SATA channels. (Default value)
NV Serial-ATA 1
Enabled Enable the first SATA 3Gb/s controller. (Default value)
Disabled Disable Serial ATA 1 supported.
NV SATA 1 Primary RAID
Enabled Enable RAID function for the first channel of the first SATA 3Gb/s controller.
(Default value)
Disabled Disable this function.
NV SATA 1 Secondary RAID
Enabled Enable RAID function for the second channel of the first SATA 3Gb/s
controller. (Default value)
Disabled Disable this function.
NV Serial-ATA 2
Enabled Enable the second SATA 3Gb/s controller. (Default value)
Disabled Disable the second SATA 3Gb/s controller.
NV SATA 2 Primary RAID
Enabled Enable RAID function for the first channel of the second SATA 3Gb/s
controller. (Default value)
Disabled Disable this function.
NV SATA 2 Secondary RAID
Enabled Enable 2nd SATA secondary RAID function. (Default value)
Disabled Disable this function.
IDE Prefetch Mode
Enabled Enable IDE data buffer to enhance HDD transfer speed. (Default value)
Disabled Disable IDE data buffer for the system stability.
USB Memory Type
SHADOW Set USB memory type to SHADOW. (Default value)
Base Memory(640K) Set USB memory type to base memory(640K).
AC97 Audio
Auto Enable onboard AC'97 audio function. (Default value)
Disabled Disable this function.
To Next Page
Loading...
