BIOS Setup- 51 -
English
2-7 MB Intelligent Tweaker(M.I.T.)
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
MB Intelligent Tweaker(M.I.T.)
CPU Frequency (MHz) [Auto]
PCIE Clock (MHz) [Auto]
CPU Clock Ratio [Auto]
DDR2 Voltage Control [Normal]
SB/PCIE Voltage [Normal]
HT-Link Voltage [Normal]
CPU Voltage Control [Normal]
Normal CPU Vcore 1.3500V
Robust Graphics Booster [Auto]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F7: Optimized Defaults
Item Help
Menu Level`
CPU Frequency (MHz)
200 ~ 500 Set CPU Frequency from 200 MHz to 500 MHz. (Default value: Auto)
PCIE Clock (MHz)
100Mhz ~ 150Mhz Set PCIE Clock from 100 MHz to 150 MHz. (Default value: Auto)
CPU Clock Ratio
The adjustable range is dependent on the CPU you install. The option will display "Locked" and
read only or will not show up if the CPU ratio is not changeable.
DDR2 Voltage Control
Please note that by overclocking your system through the increase of the DDR2 voltage, damage
to the memory may occur.
Normal Supply DDR2 voltage as DDR2 required. (Default value)
+0.1V ~ +0.3V Increase DDR2 voltage by 0.1V to 0.3V.
SB/PCIE Voltage
Set the voltage settings for Southbridge and PCI Express bus.
Normal Supply Southbridge and PCI Express bus voltage as Southbridge and PCI
Express required. (Default value)
+0.1V ~ +0.3V Increase Southbridge and PCI Express bus voltage by 0.1V to 0.3V.
Incorrectly using these features may result in system instability or corruption.
Doing a overclock or overvoltage on CPU, chipsets and memory modules may result in
damages or shortened life expectancy to these components.
Please be aware that the M.I.T. menu items are for power users only.
To Next Page
Loading...
