Gigabyte GA-M55SLI-S4 - PC Health Status

BIOS Setup- 49 -
English
2-6 PC Health Status
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
PC Health Status
Reset Case Open Status [Disabled]
Case Opened Yes
Vcore OK
DDR18V OK
+3.3V OK
+12V OK
Current System Temperature 34
o
C
Current CPU Temperature 48
o
C
Current CPU FAN Speed 3183 RPM
Current SYSTEM FAN Speed 0 RPM
Current POWER FAN Speed 0 RPM
System Warning Temperature [Disabled]
CPU Warning Temperature [Disabled]
CPU FAN Fail Warning [Disabled]
SYSTEM FAN Fail Warning [Disabled]
POWER FAN Fail Warning [Disabled]
CPU Smart FAN Control
(Note)
[Enabled]
CPU Smart FAN Mode [Auto]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F7: Optimized Defaults
Item Help
Menu Level`
Reset Case Open Status
Disabled Don't reset case open status. (Default value)
Enabled Clear case open status at next boot.
Case Opened
If the case is closed, Case Opened will show "No."
If the case is opened, Case Opened will show "Yes."
If you want to reset Case Opened value, enable Reset Case Open Status and save the change
to CMOS, and then your computer will restart.
Current Voltage(V) Vcore / DDR18V / +3.3V / +12V
Detect system's voltage status automatically.
Current System / CPU Temperature
Detect System / CPU temperature automatically.
Current CPU/SYSTEM/POWER FAN Speed (RPM)
Detect CPU/System/Power fan speed status automatically.
System/CPU Warning Temperature
60
o
C / 140
o
F Monitor System/CPU temperature at 60
o
C / 140
o
F.
70
o
C / 158
o
F Monitor System/CPU temperature at 70
o
C / 158
o
F.
80
o
C / 176
o
F Monitor System/CPU temperature at 80
o
C / 176
o
F.
90
o
C / 194
o
F Monitor System/CPU temperature at 90
o
C / 194
o
F.
Disabled Disable this function. (Default value)
CPU/SYSTEM/POWER FAN Fail Warning
Disabled Disable the CPU/System/Power fan fail warning function. (Default value)
Enabled Enable the CPU/System/Power fan fail warning function.