Gigabyte GA-M68M-S2P - Init Display First

- 39 - BIOS Setup
Away Mode
Enables or disables Away Mode in Windows XP Media Center operating system. Away Mode allows the
system to silently perform unattended tasks while in a low-power mode that appears off.
(Default: Disabled)
Backup BIOS Image to HDD
 AllowsthesystemtocopytheBIOSimageletotheharddrive.IfthesystemBIOSiscorrupted,itwill
berecoveredfromthisimagele.(Default:Disabled)
Init Display First
 Speciesthe rst initiation ofthe monitor displayfrom the installed PCIgraphicscard,PCI Express
graphics card, or the onboard VGA.
PCISlot  SetsthePCIgraphicscardastherstdisplay.
OnboardVGA Setstheonboardgraphicsastherstdisplay.
PEG   SetsthePCIExpressgraphicscardastherstdisplay.(Default)
Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller.
MS-DOS, for example, will use only this memory for display. Options are: Disabled, 32MB, 64MB (Default),
128MB, 256MB.
Onboard GPU
Enables or disables the onboard graphics function.
Enable If No Ext PEG
Activates the onboard VGA only if no PCI Express VGA card is installed. (Default)
Always Enable
Always activates the onboard VGA, whether or not a PCI Express card is installed. If you wish to set up
adualviewconguration,setthisitemtoAlwaysEnable.