- 37 - BIOS Setup
2-3 MB Intelligent Tweaker(M.I.T.)
Whether the system will work stably with the overclock/overvoltage settings you made is
dependent on your overall system configurations. Incorrectly doing overclock/overvoltage
may result in damage to CPU, chipset, or memory and reduce the useful life of these
components. This page is for advanced users only and we recommend you not to alter the
default settings to prevent system instability or other unexpected results. (Inadequately alter
ing the settings may result in system's failure to boot. If this occurs, clear the CMOS values
and reset the board to default values.)
(Note) This item is present only if you install a CPU that supports this feature.
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
MB Intelligent Tweaker(M.I.T.)
Advanced Clock Calibratioin [Press Enter]
CPU Frequency [200]
HT Link Frequency [Auto]
PCIE Clock [100]
CPU Clock Ratio [Auto]
CPU NorthBridge Freq.
(Note)
[Auto]
DRAM Configuration [Press Enter]
DDR2 Voltage Control [Normal]
CPU NB VID Control
(Note)
[Normal]
CPU Voltage Control [Normal]
Normal CPU Vcore 1.2500V
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
Advanced Clock Calibration
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Advanced Clock Calibration
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
NVIDIA Core Calibration [Disabled]
x Core 0 NVCC Percentage -2%
x Core 1 NVCC Percentage -2%
x Core 2 NVCC Percentage -2%
x Core 3 NVCC Percentage -2%
To Next Page
Loading...
