- 39 - BIOS Setup
DRAM Configuration
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
DRAM Configuration
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
SLI-Ready Memory [Disabled]
Timing Mode [Auto]
x Memory Clock x2.66 533Mhz
x CAS# latency 4T
DCTs Mode [Unganged]
SLI-Ready Memory
Allows you to enable or disable the SLI-Ready (EPP) memory function. (Default: Disabled)
Timing Items
Manual allows all Timing items below to be configurable.
Options are: Auto (default), Manual.
Memory Clock
This option is configurable only when Timing Items is set to Manual.
When you use a AM3/AM2+ CPU:
X2.00 Sets Memory Clock to X2.00.
X2.66 Sets Memory Clock to X2.66.
X3.33 Sets Memory Clock to X3.33.
X4.00 Sets Memory Clock to X4.00.
X5.33 Sets Memory Clock to X5.33.
When you use a AM2 CPU:
DDR 400 Sets Memory Clock to DDR 400.
DDR 533 Sets Memory Clock to DDR 533.
DDR 667 Sets Memory Clock to DDR 667.
DDR 800 Sets Memory Clock to DDR 800.
CAS# latency
Options are: Auto (default), 3T~7T.
DCTs Mode
Allows you to set memory control mode.
Ganged Sets memory control mode to single dual-channel.
Unganged Sets memory control mode to two single-channel. (Default)
To Next Page
Loading...
