- 41 - BIOS Setup
(Note) This item appears only if you install a CPU that supports this feature.
2-5 Advanced BIOS Features
Internal Graphics Mode
Allows you to determine whether to allocate system memory for the onboard graphics controller.
Disabled Disables the onboard graphics controller.
UMA Allocates memory for the onboard graphics controller from the system memory.
(Default)
UMA Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics con-
troller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 128MB,
256MB, 512MB.
Surround View
EnablesordisablestheSurroundViewfunction.ThisoptioniscongurableonlyifInit Display First is
set to PEG and an ATI graphics card is installed. (Default: Disabled)
Onboard VGA output connect
j
SpeciesthegraphicsdisplayoftheonboardVGAoutputfromtheD-SUB/DVI-DorD-SUB/HDMI.
D-SUB/DVI Sets the D-SUB/DVI-D as the graphics display. (Default)
D-SUB/HDMI Sets the D-SUB/HDMI as the graphics display.
AMD C1E Support
(Note)
Enables or disables the C1E CPU power-saving function in system halt state. When enabled, the CPU
core frequency and voltage will be reduced during system halt state to decrease power consumption.
(Default: Disabled)
Virtualization
Virtualization allows a platform to run multiple operating systems and applications in independent parti-
tions. With virtualization, one computer system can function as multiple virtual systems.
(Default: Disabled)
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Advanced BIOS Features
Internal Graphics Mode [UMA]
UMA Frame Buffer Size [Auto]
x Surround View Disabled
Onboard VGA output connect
j
[D-SUB/DVI]
AMD C1E Support
(Note)
[Disabled]
Virtualization [Disabled]
Patch AMD TLB Erratum
(Note)
[Enabled]
AMD K8 Cool&Quiet control [Auto]
Hard Disk Boot Priority [Press Enter]
First Boot Device [Floppy]
Second Boot Device [Hard Disk]
Third Boot Device [CDROM]
Password Check [Setup]
HDD S.M.A.R.T. Capability [Disabled]
Away Mode [Disabled]
Backup BIOS Image to HDD [Disabled]
Init Display First [PCI Slot]
hi
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
j
Only for GA-MA78LM-S2H