Gigabyte GA-Q170M-MK - Storage Interface and USB Ports; Internal and Back Panel Connectors; Hardware Monitoring Features

Storage Interface  Chipset:
- 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe
x4/x2/x1 SSD support)
- 3 x SATA Express connectors
- 6 x SATA 6Gb/s connectors
 - SupportforRAID0,RAID1,RAID5,andRAID10
* Referto"1-7InternalConnectors,"forthesupportedcongurationswiththeM.2,
SATA Express, and SATA connectors.
USB  Chipset:
- 8 x USB 3.0/2.0 ports (4 ports on the back panel, 4 ports available through
the internal USB headers)
- 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through
the internal USB headers)
Internal
Connectors
 1 x 24-pin ATX main power connector
 1 x 4-pin ATX 12V power connector
 1 x M.2 Socket 3 connector
 3 x SATA Express connectors
 6 x SATA 6Gb/s connectors
 1 x CPU fan header
 1 x system fan header
 1 x front panel header
 1 x front panel audio header
 1 x S/PDIF Out header
 1 x speaker header
 2 x USB 3.0/2.0 headers
 2 x USB 2.0/1.1 headers
 2 x serial port headers
 1 x parallel port header
 1 x Clear CMOS jumper
Back Panel
Connectors
 1 x PS/2 keyboard/mouse port
 1 x DVI-D port
 1 x DVI-I port
 2 x HDMI port
 4 x USB 3.0/2.0 ports
 2 x USB 2.0/1.1 ports
 2xRJ-45ports
 3 x audio jacks (Line In, Line Out, Mic In)
I/O Controller  iTE
®
I/O Controller Chip
Hardware
Monitor
 System voltage detection
 CPU/System temperature detection
 CPU/System fan speed detection
 CPU/System overheating warning
 CPU/System fan fail warning
 CPU/System fan speed control
* Whether the fan speed control function is supported will depend on the cooler you
install.
- 7 -