Gigabyte GA-Z68X-UD7-B3 - Page 98

Appendix - 98 -
Figure 6
Figure 7
When completed, you can see the new array under Topology\Virtual Disks (Figure 6).
5. Save the Settings and Exit.AfteryoucompletetheRAIDcongurationandbeforeyouexitthecongura-
tionscreen,besuretopress<F10>inthemainscreen.Press<Y>toconrmor<N>tocancel(Figure7).
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
Topology Information
Help
Vendor ID : 1B4B
Device ID : 91A3
Revision ID : B1
BIOS Version : 1.0.0.1029
Firmware Version : 2.2.0.1113
PCIe Speed rate : 5.0Gbps
CongureSATAas : IDEMode
Supported Mode : RAID 0 RAID 1
HBA 0 : Marvell 0
Virtual Disks
New_VD
HDD 0: WDC WD800JD-22L
HDD 1 : WDC WD800JD-22L
Free Physical Disks
Marvell RAID on chip controller.
ENTER: Operation F10: Exit/Save ESC: Return
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
Topology Information
Help
Vendor ID : 1B4B
Device ID : 91A3
Revision ID : B1
BIOS Version : 1.0.0.1029
Firmware Version : 2.2.0.1113
PCIe Speed rate : 5.0Gbps
CongureSATAas : IDEMode
Supported Mode : RAID 0 RAID 1
HBA 0 : Marvell 0
Virtual Disks
New_VD
HDD 0: WDC WD800JD-22L
HDD 1: WDC WD800JD-22L
Free Physical Disks
Marvell RAID on chip controller.
ENTER: Operation F10: Exit/Save ESC: Return
Do you want to exit from Marvell BIOS Setup?
Yes No
Exit