Gigabyte GA-Z77X-D3H - Page 43

- 43 - BIOS Setup
3D Power Control `
PWM Phase Control &
Allows you to automatically change the PWM phase according to the CPU load. The power-saving
levels are (from lowest to highest): eXm Perf (Extreme Performance ), High Perf (High Performance),
Perf (Performance), Balanced, Mid PWR (Mid Power), and Lite PWR (Light Power). Auto lets the BIOS
automatically congure this setting. (Default: Auto)
Vcore Voltage Response &
Allows you to congure the response time for Vcore changes using preset levels.
Auto Lets BIOS automatically congure this setting. (Default) 
Standard~Fast Selects Standard or Fast which represents different levels of the response time 
for Vcore changes.
Vcore Loadline Calibration ( & mΩ)
Allows you to set the Load-Line Calibration level for the Vcore. The levels are (from highest to lowest):
Extreme, Turbo, High, Medium, Low, and Standard. Selecting a higher level keeps the Vcore more consistent
with what is set in BIOS under heavy load. Auto lets the BIOS automatically congure this setting and sets
the voltage following Intel's specications. (Default: Auto)
GFX Voltage Loadline Calibration &
Allows you to set the Load-Line Calibration level for the GFX voltage. The levels are (from highest to lowest):
Extreme, Turbo, High, Medium, Low, and Standard. Selecting a higher level keeps the GFX voltage more
consistent with what is set in BIOS under heavy load. Auto lets the BIOS automatically congure this setting
and sets the voltage following Intel's specications. (Default: Auto)