Gigabyte GA-Z87-D3HP - Advanced Memory Settings

- 39 -
BIOS Setup
` Advanced Memory Settings
& ExtremeMemoryProle(X.M.P.)
(Note)
, System Memory Multiplier, Memory Frequency(MHz)
The settings above are synchronous to those under the same items on the Advanced Frequency Settings
menu.
& Performance Enhance
Allows the system to operate at three different performance levels.
Normal  Letsthesystemoperateatitsbasicperformancelevel.
Turbo   Letsthesystemoperateatitsgoodperformancelevel.(Default)
Extreme Lets the system operate at its best performance level.
& DRAM Timing Selectable
Quick and Expert allows the Channel Interleaving, Rank Interleaving, and memory timing settings below
tobecongurable.Optionsare:Auto(default),Quick,Expert.
& ProleDDRVoltage
 Whenusinganon-XMPmemorymoduleorExtremeMemoryProle(X.M.P.) is set to Disabled, this item
will display as 1.50V.WhenExtremeMemoryProle(X.M.P.) is set to Prole1 or Prole2, this item will
displaythevaluebasedontheSPDdataontheXMPmemory.
& ProleVTTVoltage
The value displayed here is dependent on the CPU being used.
& Channel Interleaving
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. Auto lets the BIOS
automaticallycongurethissetting.(Default:Auto)
& Rank Interleaving
Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different
ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically
congurethissetting.(Default:Auto)
(Note) ThisitemispresentonlywhenyouinstallaCPUandamemorymodulethatsupportthisfeature.