Gigabyte GA-Z87-D3HP - System Temperatures and Fan Controls

BIOS Setup
- 44 -
& CPU Vcore/CPU VRIN/DRAM Voltage/+3.3V/+5V/+12V/CPU VAXG
Displays the current system voltages.
& CPU/System Temperature
Displays current CPU/system temperature.
& CPU/CPU OPT/System Fan Speed
Displays current CPU/CPU_OPT/system fan speeds.
& CPU/System Warning Temperature
 SetsthewarningthresholdforCPU/systemtemperature.WhenCPUtemperatureexceedsthethreshold,
BIOSwillemitwarning sound. Options are: Disabled (default), 60
o
C/140
o
F, 70
o
C/158
o
F, 80
o
C/176
o
F,
90
o
C/194
o
F.
& CPU/CPU OPT/System Fan Fail Warning
Allows the system to emit warning sound if the fan is not connected or fail. Check the fan condition or fan
connectionwhenthisoccurs.(Default:Disabled)
& CPU/OPT Fan Speed Control (CPU_OPT Connector)
Allows you to determine whether to enable the fan speed control function for the fan connected to the
CPU_OPT connector and adjust the fan speed.
Normal AllowsthefantorunatdifferentspeedsaccordingtotheCPUtemperature.Youcanadjust
thefanspeedwithEasyTunebasedonyoursystemrequirements.(Default)
Silent Allows the fan to run at slow speeds.
Manual Allows you to control the fan speed under the Slope PWM item.
Silent Allows the fan to run at slow speeds.
& Slope PWM
 Allowsyoutocontrolthefanspeed.ThisitemiscongurableonlywhenCPU/OPT Fan Speed Control is
set to Manual.Optionsare:0.75PWMvalue/
o
C~2.50PWMvalue/
o
C.
& 1st System Fan Speed Control (SYS_FAN1 Connector)
Allows you to determine whether to enable the fan speed control function for the fan connected to the
SYS_FAN1connectorandadjustthefanspeed.
Normal Allowsthefantorunatdifferentspeedsaccordingtothesystemtemperature.Youcanadjust
thefanspeedwithEasyTunebasedonyoursystemrequirements.(Default)
Silent Allows the fan to run at slow speeds.
Manual Allows you to control the fan speed under the Slope PWM item.
Disabled Allows the fan to run at full speeds.
& Slope PWM
 Allowsyoutocontrolthefanspeed.Thisitemiscongurableonlywhen1st System Fan Speed Control
is set to Manual.Optionsare:0.75PWMvalue/
o
C~2.50PWMvalue/
o
C.
& 2nd/3rd System Fan Speed Control
Allows you to determine whether to enable the fan speed control function for the fan connected to the
SYS_FAN2/3connectorandadjustthefanspeed.
Normal Allowsthefantorunatdifferentspeedsaccordingtothesystemtemperature.(Default)
Silent Allows the fan to run at slow speeds.
Manual AllowsyoutocontrolthefanspeedundertheSlopePWMitem.
Disabled Allows the fan to run at full speeds.
& Slope PWM
 Allowsyoutocontrolthefanspeed.Thisitemiscongurableonlywhen2nd/3rd System Fan Speed
Control is set to Manual.Optionsare:0.75PWMvalue/
o
C~2.50PWMvalue/
o
C.