Gigabyte GA-Z87X-UD7 TH - Page 81

- 81 -
Conguring SATA Hard Drive(s)
Delete the RAID Array:
Todeletedtheexistingarray,selectthearrayonthemainmenu(example:VD0:New_VD)andpress<Enter>
to display the Deleteoption.Press<Enter>.Whenprompted,press<Y>toconrmor<N>tocancel(Figure8).
Figure 8
Use the Marvell
®
Storage Utility in the Operating System:
With the Marvell
®
Storage utility, you can set up an array or view the current array status in the operating system.
To install the utility, insert the motherboard driver disk, then go to Application Software\Install Application
Software and select Marvell Storage Utility to install. Note: After the installation, you must login the utility with
the same account name and password that you use to login the operating system. If you did not set the account
password before, click Login to enter the Marvell
®
Storage Utility directly.
Marvell BIOS Setup (c) 2011 Marvell Technology Group Ltd.
Topology Information
Help
ID : 0
Name : New_VD
Status : Functional
Stripe Size : 64K
RAID Mode : RAID 0
Size : 931.3GB
HBA 0 : Marvell 0
Virtual Disks
New_VD
HDD 0: ST95005620AS
HDD 1: ST95005620AS
Free Physical Disks
Marvell RAID on chip controller.
ENTER: Operation F10: Exit/Save ESC: Return
Do you want to delete this virtual disk?
Yes No
Delete Virtual Disk