3/4) CPU_FAN/SYS_FAN1/SYS_FAN2/SYS_FAN3 (Fan Headers)
All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design.
Whenconnectingafancable,besuretoconnectitinthecorrectorientation(theblackconnectorwireis
thegroundwire).Thespeedcontrolfunctionrequirestheuseofafanwithfanspeedcontroldesign.For
optimum heat dissipation, it is recommended that a system fan be installed inside the chassis.
CPU_FAN:
PinNo. Denition
1 GND
2 +12V
3 Sense
4 Speed Control
SYS_FAN1/2/3:
PinNo. Denition
1 GND
2 +12V / Speed Control
3 Sense
4 VCC
CPU_FAN
SYS_FAN2
1
5) CPU_OPT (Water Cooling CPU Fan Header)
Thefanheaderis4-pinandpossessesafoolproofinsertiondesign.Whenconnectingafancable,be
suretoconnectitinthecorrectorientation(theblackconnectorwireisthegroundwire).Mostfanheaders
possessafoolproofinsertiondesign.Whenconnectingafancable,besuretoconnectitinthecorrect
orientation(theblackconnectorwireisthegroundwire).Thespeedcontrolfunctionrequirestheuseofa
fan with fan speed control design.
• Be sure to connect fan cables to the fan headers to prevent your CPU and system from overheating.
Overheating may result in damage to the CPU or the system may hang.
• Thesefanheadersarenotcongurationjumperblocks.Donotplaceajumpercapontheheaders.
PinNo. Denition
1 GND
2 +12V / Speed Control
3 Sense
4 VCC