Gigabyte GA-Z97-HD3P - Page 21

- 21 -
` M.I.T. Current Status
This screen provides information on CPU/memory frequencies/parameters.
(Note) This item is present only when you install a CPU that supports this feature. For more information about
Intel
®
CPUs' unique features, please visit Intel's website.
M Only for GA-Z97-HD3P.
& Performance UpgradeM
(Note)
Provides you with ve different overclocking congurations. Options are: 20% Upgrade, 40% Upgrade,
60% Upgrade, 80% Upgrade, 100% Upgrade. (Default: Auto)
& CPU Base ClockM
Allows you to manually set the CPU base clock in 0.01 MHz increments. (Default: Auto)
Important:It is highly recommended that the CPU frequency be set in accordance with the CPU
specications.
& Host/PCIe Clock FrequencyM
(Note)
Allows you to manually set the host clock frequency (which controls CPU, PCIe, and memory frequencies)
in 0.01 MHz increments. This item is congurable only when CPU Base Clock is set to Manual.
& Processor Base Clock (Gear Ratio)M
(Note)
Allows you to congure the Processor Base Clock by multiplying the Host/PCIe Clock Frequency by several
preset host clock multipliers. This item is congurable only when CPU Base Clock is set to Manual.
& Spread Spectrum ControlM
(Note)
Enables or disables CPU/PCIe Spread Spectrum. (Default: Auto)
& Host Clock ValueM
This value is determined by multiplying the Host/PCIe Clock Frequency value by the Processor Base
Clock (Gear Ratio) value.
& Processor Graphics Clock
Allows you to set the onboard graphics clock. The adjustable range is from 400 MHz to 4000 MHz. (Default:
Auto)
& CPU Upgrade
(Note)
Allows you to set the CPU frequency. Options may vary depending on the CPU being used. (Default: Auto)
& CPU Clock Ratio
Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU
being installed.
& CPU Frequency
Displays the current operating CPU frequency.
& CPU Clock Ratio, CPU Frequency
The settings above are synchronous to those under the same items on the Advanced Frequency Settings
menu.
& KOC
(Note)
Allows for increased performance by using certain CPUs. (Default: Auto)
& CPU PLL Selection
Allows you to set the CPU PLL. Auto lets the BIOS automatically congure this setting. (Default: Auto)
& Filter PLL Level
Allows you to set the Filter PLL. Auto lets the BIOS automatically congure this setting. (Default: Auto)
& Uncore Ratio
Allows you to set the CPU Uncore ratio. The adjustable range is dependent on the CPU being used.
& Uncore Frequency
Displays the current CPU Uncore frequency.
` Advanced CPU Core Settings
` Advanced Frequency Settings