Gigabyte GA-Z97-HD3P - Save & Exit

- 34 -
& PCIe ASPM
Allows you to congure the ASPM mode for the device connected to Chipset's PCI Express bus. Auto lets the
BIOS automatically congure this setting. This item is congurable only when Platform Power Management
is set to Enabled. (Default: Auto)
& CPU DMI Link ASPM Control
Allows you to congure the ASPM mode for the CPU side of the DMI link. Auto lets the BIOS automatically
congure this setting. This item is congurable only when Platform Power Management is set to Enabled.
(Default:L0sL1)
& PCH DMI Link ASPM Control
Allows you to congure the ASPM mode for both CPU side and Chipset side of the DMI link. Auto lets the BIOS
automatically congure this setting. This item is congurable only when Platform Power Management is
set to Enabled. (Default: Enabled)
2-7 Save & Exit
& Save & Exit Setup
Press <Enter> on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup
program. Select No or press <Esc> to return to the BIOS Setup Main Menu.
& Exit Without Saving
Press <Enter> on this item and select Yes. This exits the BIOS Setup without saving the changes made
in BIOS Setup to the CMOS. Select No or press <Esc> to return to the BIOS Setup Main Menu.
& LoadOptimizedDefaults
Press <Enter> on this item and select Yes to load the optimal BIOS default settings. The BIOS defaults
settings help the system to operate in optimum state. Always load the Optimized defaults after updating
the BIOS or after clearing the CMOS values.
& BootOverride
Allows you to select a device to boot immediately. Press <Enter> on the device you select and select Yes
to conrm. Your system will restart automatically and boot from that device.
& SaveProles
This function allows you to save the current BIOS settings to a prole. You can create up to 8 proles and
save as Setup Prole 1~ Setup Prole 8. Press <Enter> to complete. Or you can select Select File in
HDD/USB/FDD to save the prole to your storage device.