Do you have a question about the Gigabyte GA-Z97N-WIFI and is the answer not in the manual?
Non-ECC | Yes |
---|---|
Memory channels | Dual-channel |
Memory slots type | DIMM |
Number of memory slots | 2 |
Supported memory types | DDR3-SDRAM |
Maximum internal memory | 16 GB |
Supported memory clock speeds | 1333, 1600 MHz |
Processor socket | LGA 1150 (Socket H3) |
Processor manufacturer | Intel |
Compatible processor series | Intel® Celeron® |
USB 2.0 connectors | 1 |
Number of SATA connectors | 6 |
Number of Parallel ATA connectors | - |
RAID levels | 0, 1, 5, 10 |
Supported storage drive interfaces | SATA |
HDMI version | 1.4a |
Headphone outputs | 5 |
DVI-D ports quantity | 0 |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 4 |
Wi-Fi standards | 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
Bluetooth version | 4.0 |
Audio chip | Realtek ALC892 |
Component for | PC |
Power source type | ATX |
Motherboard chipset | Intel® Z97 |
Audio output channels | 7.1 channels |
Motherboard form factor | mini ITX |
Maximum resolution | 4096 x 2160 pixels |
Maximum graphics card memory | 1000 MB |
BIOS type | UEFI AMI |
ACPI version | 5.0 |
BIOS memory size | 64 Mbit |
Bundled software | Norton Internet Security (OEM version)\\r Intel Rapid Start Technology\\r Intel Smart Connect Technology\\r Intel Smart Response Technology\\r Intel Wireless Display |
Width | 170 mm |
---|
Visual diagram identifying motherboard components and connection points.
Safety and preparation guidelines before installing hardware components.
Details on CPU, Chipset, Memory, Graphics, Audio, LAN, and other components.
Step-by-step guide for installing the CPU and its cooler onto the motherboard.
Instructions for installing DDR3 memory modules into the motherboard's memory sockets.
Procedures for correctly installing expansion cards into available slots.
Description and identification of all ports located on the motherboard's rear panel.
Identification and explanation of internal motherboard headers for various connections.
Overview of the initial GIGABYTE logo screen displayed during system boot.
Introduction to the BIOS interface, covering Startup Guide and ST Mode options.
Configuration settings for CPU/memory frequency, voltage, and system monitoring.
Displays motherboard model, BIOS version, and allows system date/time adjustment.
Options for boot order, security settings, and system feature configurations.
Settings for managing onboard devices like SATA, USB, LAN, and audio.
Configuration of system power-saving features, AC power loss behavior, and wake-up events.
Options for saving BIOS changes, loading defaults, and exiting the BIOS setup.
Steps to set the SATA controller mode (IDE, AHCI, RAID) within the BIOS setup.
Detailed steps for creating a RAID array using the UEFI BIOS interface.
Guide to installing necessary RAID/AHCI drivers and the operating system.
Process for restoring data on a fault-tolerant RAID array by replacing a failed drive.
Instructions for installing motherboard drivers using the provided driver disk.
Compliance notices regarding safety, environmental, and wireless standards.
Contact information for GIGABYTE technical support and global office locations.