- 28 -
&
System Language
Selects the default language used by the BIOS.
&
System Date
Sets the system date. The date format is week (read-only), month, date, and year. Use <Enter> to
switch between the Month, Date, and Year elds and use the <Page Up> or <Page Down> key to set the
desired value.
&
System Time
Sets the system time. The time format is hour, minute, and second. For example, 1 p.m. is 13:0:0.
Use <Enter> to switch between the Hour, Minute, and Second elds and use the <Page Up> or <Page
Down> key to set the desired value.
&
Access Level
Displays the current access level depending on the type of password protection used. (If no password is
set, the default will display as Administrator.) The Administrator level allows you to make changes to all
BIOS settings; the User level only allows you to make changes to certain BIOS settings but not all.
2-4 BIOSFeatures
& BootOptionPriorities
Species the overall boot order from the available devices.
Removable storage devices that support GPT format will be prexed with "UEFI:" string on the boot device
list. To boot from an operating system that supports GPT partitioning, select the device prexed with "UEFI:"
string.
Or if you want to install an operating system that supports GPT partitioning such as Windows 7 64-bit, select
the optical drive that contains the Windows 7 64-bit installation disk and is prexed with "UEFI:" string.
& Bootup NumLock State
Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default:
Enabled)