GN-BTP01 Bluetooth USB Printer Adapter
13
Step13. Please select “Gigabyte” from the list and then click “Connect” button.
Step14. The configuration screen of the printer will appear. Now, you can find the new
port “Gigabyte(1)” will appear on the port checked list. Please select the new
bluetooth port of the printer which you have been installed, and then click
“Apply” button. Now, please go to the General Page and click “Print Test Page”
button to check if the setup is succussfully. (Please refer to the Section 2.2,
Step9)
To Next Page
Loading...