Need help?Do you have a question about the Gigabyte GS-R12P4E and is the answer not in the manual?
General| Form Factor | 1U Rackmount |
|---|---|
| Chipset | Intel C612 |
| Memory Type | DDR4 ECC Registered |
| Memory Slots | 16 |
| SAS Controller | Optional |
| Network Interface | 2 x Gigabit Ethernet (Intel i350-AM2) |
| Management | IPMI 2.0 |
| CPU Socket | Dual Socket R3 (LGA 2011-3) |
Essential safety guidelines before installing hardware components.
Detailed technical specifications of the server hardware.
Crucial safety steps to follow before starting hardware configuration.
Step-by-step guide to safely detach the server's outer casing.
Procedure for correctly installing the Central Processing Unit onto the motherboard.
Instructions for mounting the thermal heatsink onto the CPU for cooling.
Guide on how to install RAM modules into the motherboard slots.
Procedure for installing and securing storage drives into the chassis.
Identification of components and ports on the front of the server.
Identification of components and ports on the rear of the server.
Explanation of the status indicators and control buttons on the front panel.
Diagram and list of all components on the GA-7PESE3 motherboard.
Configuration guide for motherboard jumpers and their functions.
Overview of keyboard shortcuts for navigating and operating BIOS Setup.
Primary BIOS screen for basic system information and settings.
BIOS section for configuring advanced hardware component functions.
BIOS settings related to North Bridge and South Bridge chipset configurations.
BIOS options for setting passwords to protect system access.
Options for saving changes, discarding them, or loading defaults before exiting BIOS.
Procedures for restoring the BIOS to its working state if corrupted.
To Next Page
