Gigabyte GV-R9000 - 3. Software Installation Procedures; 3.1. Windows 98;ME;XP Driver Installation

Software Installation- 9 -
English
3. SOFTWARE INSTALLATION
In this manual, we assume that your CD-ROM Drive letter to be Drive D:
3.1. WINDOWS
®
98 /98SE / WINDOWS
®
ME / WINDOWS
®
XP DRIVER
AND UTILITIES INSTALLATION
The installation of Win
®
98/98SE / Win
®
ME / Win
®
XP drivers is very simple. When you
insert the driver CD into your CD-ROM drive, you can see the AUTORUN window (if it
does not show up, run "D:\setup.exe"). Then you can follow guides to setup your GV-
R9000 driver (Please follow the subsection 3.1.3 "Step By Step Installation" to install the
driver for your GV-R9000 graphics accelerator.
3.1.1. OPERATING SYSTEM REQUIREMENT
l If your OS is Microsoft Windows, when loading the GV-R9000 drivers for the system,
please make sure your system (Windows 98/98SE, Windows2000 or Windows
ME) has installed DirectX8.1 or later.
l If you install the GV-R9000 drivers for the motherboard, which consist of SIS, ALI
or VIA chipsets, please install the appropriate Driver program for that motherboard.
Or please contact your motherboard nearest dealer for M/B Driver.