Gigabyte GV-R9000 - 3.2. Windows 2000 Driver Installation; 3.3. BIOS Update Utility

GV-R9000 Graphics Accelerator
- 22 -
English
3.2. WINDOWS 2000 DRIVER INSTALLATION
Please make sure the Windows
®
2000 have installed Windows
®
2000 Service Pack version
2 (or later) before installing the graphics accelerator driver.
With Windows
®
2000 running on your computer, you need to install the GV-R9000 driver
to take advantage of the higher performance, resolutions, and special graphic features
of the Graphics card. To ensure you install the latest driver, use the Installation CD that
shipped with your GV-R9000 graphics card.
To install the GV-R9000 driver for Windows
®
2000
1. Insert the INSTALLATION CD into your CD-ROM drive. If Windows
®
runs the CD
automatically.
2. Click Start.
3. Select Run.
4. Type the following:
D:\SETUP
(If D is not your CD-ROM drive, substitute D with the correct drive letter.)
5. Click "OK".
6. Click on "Install Display Drivers(Radeon 9000 Series)" to begin the Installation
Wizard.
7. Click "Next".
8. Click "Yes" to the license agreement.
9. Follow the Wizard's on-screen instructions to complete the installation.
3.3. BIOS FLASH UTILITY
GV-R9000 BIOS update procedure:
MNote: Please download the newest BIOS from our website (www.gigabyte.com.tw)
or contact your local dealer for the file.
MIf you want to realize the BIOS flash information, please refer to detail on P.24.