- 13 - Hardware Installation
Video
(H262-PC0)
Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM
Management chip on CMC board:
Integrated in Aspeed® AST2520A2-GP
Storage
(H262-NO0)
Per node:
6 x SATA/SAS/Gen4 NVMe hot-swappable bays
1 x SATA DOM
Total:
24 x SATA/SAS/Gen4 NVMe hot-swappable bays
4 x SATA DOM
(H262-PC0)
(H262-PC1)
Per node:
2 x SATA/SAS/NVMe hot-swappable bays
1 x SATA DOM
Total:
8 x SATA/SAS/NVMe hot-swappable bays
4 x SATA DOM
RAID For SATA drives:
Intel® SATA RAID 0/1/5/10
For NVMe drives:
Intel® Virtual RAID On CPU (VROC) RAID 0, 1, 10, 5
Note:
1. VROC module is compatible for Intel®SSD only
2. Default 1 PCS VROC module for one 2U 4 Nodes server system
Expansion Slots Per node:
Riser Card CRSH01D:
1 x Half-length low-prole slot with PCIe x16 (Gen4 x16 bus)
Riser Card CRSH01E:
1 x Half-length low-prole slots with PCIe x8 (Gen4 x16 bus)
1 x OCP 2.0 mezzanine slot with PCIe Gen3 x8 bus*
Total:
4 x Half-length low-prole slots with PCIe x16 (Gen4 x16 bus)
4 x Half-length low-prole slots with PCIe x8 (Gen4 x16 bus)
4 x OCP 2.0 mezzanine slots with PCIe Gen3 x8 bus*
*NOTE: OCP 2.0 bandwidth is shared with onboard LAN, if need OCP 2.0 Gen3 x16
bandwidth, onboard LAN would be disabled.
To Next Page
Loading...
