Gigabyte M27U - Quick Switch Settings; Other Settings

G
aming Monitor User Guide
- 34 -
Quick Switch Assign the function of the hot keys.
Available options: Aim Stabilizer sync, Black Equalizer,
Low Blue Light, Volume, Input, Contrast, Brightness,
and Picture Mode.
The default setting of the hot keys as below:
Up ( ): Black Equalizer
Down ( ): Picture Mode
Right ( ): Input
Left ( ): Volume
Other Settings • Resolution Notice: When this function is enabled,
the recommended resolution message will
appear on the screen when the monitor switches
to another input source.
• Input Auto Switch: When this function is enabled,
it automatically switches to an available input
source.
• Auto Power OFF: When this function is enabled,
the monitor will automatically turn off after a
certain amount of time.
• LED Indicator: By default, the LED indicator is set
to Always ON.
Always ON: The Power LED lights white
during operation in standby mode.
Always OFF: Turn off the Power LED.
Standby ON: The Power LED lights white in
standby mode.
When the power supply is switched off, the
Power LED will remain off.
• Type-C Compatibility: Turn this option on to
improve mobile devices compatibility.
• HDMI Version: Select the HDMI version.