- 40 -
Gaming Monitor User Guide
Item Description
Quick Switch Assign the function of the hot keys.
Available options: Aim Stabilizer Sync, Black
Equalizer, Volume, Input, Contrast, Brightness, and
Picture Mode.
The default setting of the hot keys as below:
D Up ( ): Black Equalizer
D Down ( ): Picture Mode
D Right ( ): Input
D Left ( ): Volume
Note: The Monitor uses low blue light panel and
compliance with TÜV Rheinland Low Blue Light Hardware
Solution at factory reset/default setting mode (Brightness:
55%, Contrast: 50%, CCT: Normal, Preset mode: Standard).
Other Settings • Resolution Notice: When this function is enabled,
the recommended resolution message will appear
on the screen when the monitor switches to
another input source.
• Input Auto Switch: When this function is enabled,
it automatically switches to an available input
source.
• Auto Power OFF: When this function is enabled,
the monitor will automatically turn o after a
certain amount of time.
• LED Indicator: By default, the LED indicator is set
to Always ON.
D Always ON: The Power LED lights white during
operation and lights interval every 1 sec. in
standby mode.
D Always OFF: Turn o the Power LED.
D Standby ON: The Power LED turns o during
operation and lights interval every 1 sec. in
standby mode.
D When the power supply is switched o, the
Power LED will remain o.
To Next Page
Loading...
