Gigabyte ME03-CE0 - Page 111

BIOS Setup
- 111 -
Parameter
Description
HSMP Support
Enable/Disable the HSMP support.
Options available: Disabled, Enabled, Auto. Default setting is Auto.
SVI3 SVC Speed Control Options available: Auto, Manual. Default setting is Auto.
3D V-Cache Options available: Auto, Disable, 1 stack. Default setting is Auto.
Diagnostic Mode Options available: Disabled, Enabled, Auto. Default setting is Auto.
PCIE Speed PMM
Control
Options available: Dynamic link speed determined by Power Management
functionality, Static Target Link Speed (GEN4), Static Target Link Speed (GEN5),
Auto. Default setting is Auto.