Gigabyte ME03-CE0 - Installing and Removing a Memory Module; DIMM Population Table; Processor and Memory Module Matrix Table

- 14 -
Hardware Installation
1-4-2 Installing and Removing a Memory Module
Before installing a memory module, make sure to turn off the computer and unplug the
power cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR5 DIMMs on this motherboard.
1
2
2
Follow these instructions to install a DIMM module:
1. Insert the DIMM memory module vertically into the DIMM slot and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.
1-4-3 DIMM Population Table
1-4-4 Processor and Memory Module Matrix Table
DIMM
Type
DIMM Population DDR5 Frequency (MT/s)
DIMM 0 DIMM 1
14-layer 77mil
PCB stackup
RDIMM
-- 1R 4800
1R 1R 4000
-- 2R 4800
2R
2R 3600
4 DIMM
Memory
Q’ty
H1
H0
F1F0B0B1D0D1 E1E0A0A1
1 DIMM
2 DIMM
6 DIMM
8 DIMM
12 DIMM
CPU0
V
V
V
VVVV
VV VV V
V
VV
VV V
VV V VV V
VV
V V VV
V
V
V