Gigabyte ME03-CE0 - Broadcom Netxtreme BCM5720 Gigabit Ethernet

BIOS Setup
- 63 -
2-2-21 Broadcom NetXtreme BCM5720 Gigabit Ethernet
Parameter Description
Firmware Image Menu
Press[Enter]toviewrmwareimageinformation.
MBACongurationMenu
Press[Enter]tocongureadvanceditems.

Legacy Boot Protocol
– Selects non-UEFI Boot Protocol: Preboot Execution Environment
(PXE)/iSCSI.
– Options available: PXE, iSCSI, NONE. Default setting is PXE.

Boot Strap Type
– Selects the boot strap type. Options available: Auto Detect, BBS,
Int 18h, Int 19h. Default setting is Auto Detect.

Hide Setup Prompt
– CongureswhethertheSetupPromptisdisplayedduringROM
initialization.
– Options available: Disabled, Enabled. Default setting is Disabled.

Setup Key Stroke
– Congureskeystrokestoinvokethecongurationmenu.
– Options available: Ctrl-S, Ctrl-B. Default setting is Ctrl-S.

Banner Message Timeout
– Selects the timeout value. (0 defaults to 4 seconds, 15 is no delay,
1-14 is timeout value in seconds)
– Default setting is 5.