Gigabyte ME03-CE0 - Page 62

BIOS Setup
- 62 -
Parameter Description
MBACongurationMenu
(continued)

Pre-boot Wake On LAN
– ConguresPre-bootWakeonLAN(WOL).
– Options available: Disabled, Enabled. Default setting is Enabled.

VLAN Mode
– ConguresthevirtualLAN(VLAN)mode.
– Options available: Disabled, Enabled. Default setting is Disabled.

VLAN ID
– CongurestheVLANID(1…4094).
– This item is available only when VLAN Mode is Enabled.

Boot Retry Count
– Selects the number of boot retries.
– Options available: No Retry, 1 Retry, 2 Retries, 3 Retries, 4 Retries,
5Retries,6Retries,IndeniteRetries.DefaultsettingisNo Retry.
Blink LEDs
IdentiesthephysicalnetworkportbyblinkingtheassociatedLED.
Pressthenumerickeystoadjustdesiredvalues.
Link Status
Speciesthelinkstatusoftheport.
Physical Link Speed
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
Chip Type
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
PCI Device ID
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
Bus:Device:Function
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
Permanent MAC Address
Displays the MAC address of the Ethernet controller.
Virtual MAC Address
Displays the virtual MAC address of the Ethernet controller.
Restore Defaults
Resets the adapter to factory defaults.