Gigabyte MZ32-AR0 - User Manual

BIOS Release Notes
1
TITLE
SUBJECT:
MZ32-AR0 BIOS Release Notes version F03b
System:
R152-Z30-00, R152-Z31-00, R152-Z32-00, R272-Z30-00, R272-Z31-00,
R272-Z32-00, W282-001-JN, R272-Z33-ES
About This Release
Build Date: 2019/12/20
BIOS Checksum: 0xDD08C7CE (16M)
Release Owner: Ben.Lee
BIOS Components/Contents
Processor stepping(s) supported: AMD Naples Processors
System hardware configurations supported: MZ32-AR0,
Microcode updates versions:
CPUID
Family
Microcode
Update ID
Naples
Family 17h Model 00-0Fh
08001230
IPMI support:
AMI Kernel version: 5.013_NaplesCrb_0ACIJ022
AGESA PI version: NaplesPI 1.0.0.B
OPROM version :
OPROM
Version
AST2500
1.09.0
Installation Notes
BIOS UPDATE INSTRUCTIONS FOR EFI Shell:
1. Insert USB flash drive to system for BIOS upgrade.
2. Power on system and boot to Build-In Shell.
3. Enter your USB filesystem, like “fs0:” or “fsx:”, “x” is your USB filesystem number
4. Execute F.nsh for bios update
5. After bios flash finish, please reboot system
BIOS UPDATE INSTRUCTIONS FOR Windows:
1. Insert bios update USB flash drive.
2. Use Command Shell
3. Execute \Tool\WIN\Win32\f.bat or \Tool\Win64\f.bat for bios update
4. After bios flash finish, please reboot system

Gigabyte MZ32-AR0 Specifications

General

Form Factor	E-ATX
Memory Type	DDR4
U.2 Ports	1
RAID Support	RAID 0, 1, 10
Memory Slots	8
Expansion Slots	3 x PCIe 4.0 x16
M.2 Slots	2
SATA Ports	8
USB Ports (Rear)	2 x USB 2.0 ports
Power Connectors	1 x 24-pin ATX main power connector 2 x 8-pin ATX 12V power connectors