Gigabyte MZ72-HB2 User Manual

MZ72-HB2
AMD EPYC™ 7003 Dual Sockets Server Motherboard
User Manual
Rev. 3.0

Gigabyte MZ72-HB2 Specifications

General

Brand	Gigabyte
Model	MZ72-HB2
Category	Motherboard
Language	English

Summary

Chapter 1 Hardware Installation

1-1 Installation Precautions

Provides essential guidelines and procedures for safely installing hardware components to prevent damage.

1-2 Product Specifications

Details the technical specifications of the motherboard, including form factor, CPU, chipset, memory, LAN, graphics, and storage.

Internal I/O Connectors

Rear I/O Connectors

1-3 Installing and Removing the CPU and Heat Sink

Provides step-by-step instructions and warnings for installing and removing the CPU and heat sink.

1-4 Installing and Removing Memory

Guides on how to install and remove memory modules, emphasizing precautions and compatibility, including 8-channel configuration.

1-5 Installing and Removing the M.2 SSD Module

Instructions for installing and removing an M.2 SSD module on the motherboard.

1-6 Back Panel Connectors

Details and describes the function of each connector on the motherboard's back panel.

1-7 Internal Connectors

Provides a diagram and list of internal connectors on the motherboard and their functions.

1-8 Jumper Settings

Chapter 2 BIOS Setup

2-1 The Main Menu

Describes the Main Menu of the BIOS Setup, its navigation, and on-screen help features.

2-2 Advanced Menu

Details the Advanced Menu options for configuring hardware components and system features.

2-2-1 Trusted Computing

2-2-4 AST2600 Super IO Configuration

2-2-6 Serial Port Console Redirection

Enables console redirection over LAN for remote system management.

2-2-7 CPU Configuration

2-2-8 PCI Subsystem Settings

Configuration options for PCI lanes, I/O ROM, onboard controllers, and SR-IOV support.

2-2-9 USB Configuration

2-2-10 Network Stack Configuration

2-2-17 Broadcom BCM57416 10GBASE-T Network Connection

2-2-19 MAC IPv4 Network Configuration

2-2-20 MAC IPv6 Network Configuration

2-3 AMD CBS Menu

CPU-related configuration options for AMD chipsets, including common options for CPU, DF, UMC, NBIO, FCH, SOC, and workload tuning.

2-3-1 CPU Common Options

Common options for CPU configuration, including performance, prefetcher settings, and core watchdog.

2-3-2 DF Common Options

2-3-3 UMC Common Options

2-3-4 NBIO Common Options

2-3-5 FCH Common Options

2-4 AMD PBS Menu

2-4-1 RAS

2-5 Chipset Setup Menu

2-5-1 North Bridge

2-6 Server Management Menu

2-6-1 System Event Log

2-6-3 BMC Network Configuration

2-6-4 IPv6 BMC Network Configuration

2-7 Security Menu

Options for securing the system through passwords and secure boot settings.

2-7-1 Secure Boot

Configures Secure Boot settings for enhanced system security, including system mode and key management.

2-8 Boot Menu

Sets boot-up parameters, including drive priority, setup prompt timeout, quiet boot, and boot mode selection.

Boot Configuration

Sets boot-up parameters, including setup prompt timeout, quiet boot, and boot mode selection.

FIXED BOOT ORDER Priorities

2-9 Save & Exit Menu

Save Options

2-10 BIOS Recovery

Provides instructions for restoring the BIOS in case of corruption using embedded recovery techniques.

Recovery Instruction

Provides step-by-step instructions for restoring the BIOS in case of corruption.